Spray On Metal Polish

Spray Shine is a Premium AMS Certified Metal Polish

Anodized wheels on an Exis trailer. These wheels are plastic coated and were polished with Quick Shine. No cleaner was used. Each wheel took about 15 minutes. Compare this shine to your current polish on anodized wheels. 1-16oz can of spray shine will clean and polish about 20 of these type wheels

The photo above shows a diamond plate fender on a 30 foot Logan trailer. The fenders and running boards were first cleaned with the metal cleaner sprayed on spread out with cleaner applicator, then wiped off and polished with metalwax yellow polish. We used one coat with a finish coat of the Quick Spray Shine.

On this size project you want to clean and polish large sections at a time untill job is finished. One person can complete one side in about 1 hour. The Quick Shine adds a deeper gloss and shine enhancement. The anodized (plastic coated) wheels were polished with Quick Shine only.one coat each wheel.The Quick Shine works extremely well on these type wheels. You will be impressed with what this product can do for your anodized wheels. For more before and after photos click here

LARGE BRASS WALL DISPLAY
4 foot circle

Before and after photos of Quick Spray Shine
this piece was polished with 2 coats spray shine
total polishing time 35 minutes including the work around
the waffle edge

Suggested Applications Include: Brass Elevators, Brass Railing, Decorator Wall Brass, Door Plates and Handles, Aluminum Wheels, Anodized Wheels, Chrome wheels, Billet wheels, Diamond Plate, Aluminum Fuel Tanks, Stainless Steel Stove Tops, Stainless Steel Washers Stainless Steel Tables and Plate and more...

Aluminum, Brass, Silver, Stainless Steel
Chrome, Copper, Bronze,Gold and More...

16oz.Spray bottle of

Spray On Metal Polish $31.95
More sizes & combos click here

REMOVES HARD WATER SPOTS FROM CHROME

SPRAY ON METAL POLISH

Is a new product. It's advanced technology utilizes a unique process to manufacture a smooth and fast polishing product that produces an outstanding shine and is economical to use.Product can be used as a spray on or attatch metering top (included) and use as a liquid polish

It works like this. Spray one spritz of Quick Spray Shine on the metal surface, spread on surface as you wipe off. Your metal is instantly shined. There is no hard polishing or rubbing.

It's spray on wipe off "That's it"

16 ounce spray bottle will polish . Wheels, Tanks, diamond plate, chrome and trim. You could polish an entire stainless steel kitchen with one spray bottle or polish all the brass in a building or restaurant. You get the idea. A little goes a long way.

This Product is For Use On: Polished or smooth metals or cast type aluminum.brass,copper,bronze Quick Spray Shine spray on polish is the only polish that can polish sand cast metals..

For smooth type metals. If your metal needs to be polished use the metalwax set to bring your metal up to shine then use the Quick Shine.

Example: You have a 18 wheeler truck and it is polished, but you don't have the time to re-polish. Use Quick Shine for a 100% fast refresh . To refresh a 150 gallon fuel tank with Quick Shine would take you 15 minutes and it would look like you just buffed it. Other examples: If You do building maintenance in a building that has lots of brass and it has finger print problems and becomes cloudy, use Quick Shine. Just spray on the brass and wipe off for a 100% increase in shine and stop finger prints. You will have brass that people talk about.

Quick Shine will cut your labor by 75% over any other polishing product and increase your shine more than 100%.

Note: This product can be used to polish cast aluminum. Like intake manifolds and other cast aluminum. When using for this application spray on polish and polish surface with a nylon bristle brush. Wash off all black residue with dish soap and water, using brush to remove polish from metal pores. Let metal dry. On manifolds it is necessary to de grease first then clean with the fluoride HP metal cleaner. Sold separately

Browse the pages of this web store for more photos of Quick Spray Shine at work

The photos below shows the decor plate cleaned and polished. This is how we polished this piece. First, we sprayed metal cleaner on the surface with a trigger sprayer and brushed it all around to remove the old polish. We let the cleaner stand about 15 minutes, gave it a final brush then rinsed off with water. Dry the surface and apply Spray Shine to the entire surface. Polish with a a towel and nylon bristle brush till you see black residue & you see shined brass.

Wipe off with micro fiber towel then use liquid dish soap & water wash off the remaining polish. Use soft nylon bristle brush. Then dry.

0000 steel wool works good on the outer edge of the waffle trim. Total work time on this piece is about 1 hour or less for both sides Use micro fiber towel for final buffing
Your Brass is drop dead beautiful!

Spray on Metal Polish

Aircraft,Trucks, Cars, Boats, Restaurants,
Bars, Hotels, Fire Equipment,Building Maintenance, Home, Commercial, Industrial applications and more...